Sea-Swirl: 2023 Pricing

The units are designed to OSCILLATE 90 DEGREES EVERY 60 SECONDS (180 degrees with Y attachment for 3/4- and 1-inch models), which provides a gradual horizontal movement of water. Circulation is a very important part of the aquarium hobby. The hobbyist often overlooks circulation in their quest to provide their aquarium system with the best of filtration, lighting, and skimming. I feel, this is a very bad oversight on the part of the hobbyist. Circulation has been the solution to a great many of the problems I have encountered in the aquarium maintenance business. One of the key pieces of equipment in water circulation are power heads. A power head is a submersible motor designed to move water in a linear direction. They have their pros and cons, but for the most part they serve a necessary function adequately. Now there is an improved method of circulating water. Saltwater and freshwater hobbyists can benefit from this device in many ways:
Eliminates wave makers and power heads. | Maintenance free. |
Increased horizontal water circulation. | Better surface gas exchange. |
Minimizes dead spots in the aquarium. | Additional variety of water movement. |
Removal of harmful waste products. | Will not heat up the water. |
Nothing to hide and will not clog. | Discourages growth of unwanted algae. |
Here is some technical information from the manufacture Aquarium Currents Inc. The Sea-Swirl is a black vented plastic unit with a 3- or 5-watt motor mounted inside. The dimensions vary with the unit and are found below. The addition of new motors for Australia, Uk, Europe, and New Zealand adds a wide variety of versatility to the Sea-Swirl. The unit has (3) VITON O-Rings sealed with Teflon grease for durability and reliability. The 9foot electrical cord makes it easy to find an outlet just about anywhere around your system. The unit has an adjustable bracket for easy installation on the top of any aquarium. The motor oscillates 90 degrees every 60 seconds generating a gradual horizontal water flow, with an adjustable nozzle. We do sell an optional "fanning action" flared nozzle and a 180-degree capability "Y" fitting. Larger units are, a 3/4" model-850GPH and 1" model-1150GPH for larger installations. The total height for the 3/4" model is 4 1/2'' and the 1-inch model is 4 3/4''. This makes it small enough to go on the top of most any aquarium set up. Each unit is maintenance free and permanently lubricated. Sea-Swirl's motors are UL Listed and CSA certified with a ONE-year manufacturer warranty. All units are made in the USA and are US Patent Pending.
|
Three quarter inch unit:
See specs. for measurements.
Flow Rate of 3/4" Model - 850 GPH
Check out the Acrylic tank mounting bracket for large acrylic tanks.
Will fit 1/2" and 3/4" acrylic tank lip.
Corner mounting bracket available.
I need to know what Sea-Swirl unit you have to match the holes on the mounting bracket.
<----- Specifications
<----- Click here for the 3/4 inch models.
3/4 inch Units are: $350.00 +shipping
|
One inch Unit:
See specs. for measurements.
Flow Rate of One Inch Model - 1150 GPH
Check out the Acrylic tank mounting bracket for large acrylic tanks.
Will fit 1/2" and 3/4" acrylic tank lip.
Corner mounting bracket available.
I need to know what Sea-Swirl unit you have to match the holes on the mounting bracket.
<----- Specifications
<----- Click here for the 1 inch models.
|
**Important**
All prices are subject to change.
Cashier's check & money order's accepted.
Credit Cards & E*Checks through
![]() |
(All transactions other than PayPal could delay shipping one to two weeks.)
United States shipping only !
Orders are shipped PRIORITY MAIL direct from the manufacture. Please allow 3-7 Business days.
All products are sold with the manufacture guarantee only. Aquatic-care is under no obligation to exchange or replace any product.
ALL orders are subject to a $40.00 restocking fee after 24 hours from purchase if cancelled.
6% Sales Tax required for Pennsylvania customers.
Call me with questions at (570)-639-3911